Everett Charles Technologies Contact Products Group has been a leader in the development of advanced test products since 1965. The line of products includes signature POGO Spring Contact Probes, loaded and bare board probes, battery interconnects, RF high frequency and high current test probes products. ECT continues to expand the limits of test technology with innovative probe designs that deliver higher quality, longer life, and better performance.
The ICT/FCT product line, which includes LFRE, POGO Plus, Pylon and long travel probes, addresses the unique demands of loaded board and vacuum fixture applications. ECT developed various features to optimize the probe performance: bias-ball design, proprietary plating processes and the precision MicroSharp tip.
-
ECT Bead Probe BTP-25C-4
- € 2,46 Excl.
- Toevoegen aan winkelwagen
- Bead probe technology (BPT) is technique used to provide electrical access (called “nodal access”) to printed circuit board (PCB) circuitry for performing in-circuit testing (ICT). It makes use of small beads of solder placed onto the board's traces to allow measuring and controlling of the signals using a test probe. This permits test access to boards on which standard ICT test pads are not feasible due to space…
-
ECT Bead Probe BTP-25C-8
- € 2,46 Excl.
- Toevoegen aan winkelwagen
- Bead probe technology (BPT) is technique used to provide electrical access (called “nodal access”) to printed circuit board (PCB) circuitry for performing in-circuit testing (ICT). It makes use of small beads of solder placed onto the board's traces to allow measuring and controlling of the signals using a test probe. This permits test access to boards on which standard ICT test pads are not feasible due to space…
-
ECT If. pin Zehntel SIP-90-3
- € 0,29 Excl.
- Toevoegen aan winkelwagen
- Test System Interface Probe
-
ECT Probe BIP-1
- € 3,26 Excl.
- Toevoegen aan winkelwagen
- Niet zeker welke Probe-Tip (-kop) voor u de meest geschikte is, kijk dan hier! VERENDE TESTPENNEN (Test Probes) Om een geassembleerd printpaneel betrouwbaar te kunnen testen is een 100 % betrouwbare elektrische interface tussen tester en printpaneel een must. Als contactmedium tussen print en tester worden daarom verende testpennen toegepast die in een z.g.n pennenbed, Testfixture of testmal worden gemonteerd.…
