Everett Charles Technologies Contact Products Group has been a leader in the development of advanced test products since 1965. The line of products includes signature POGO Spring Contact Probes, loaded and bare board probes, battery interconnects, RF high frequency and high current test probes products. ECT continues to expand the limits of test technology with innovative probe designs that deliver higher quality, longer life, and better performance.
The ICT/FCT product line, which includes LFRE, POGO Plus, Pylon and long travel probes, addresses the unique demands of loaded board and vacuum fixture applications. ECT developed various features to optimize the probe performance: bias-ball design, proprietary plating processes and the precision MicroSharp tip.
“ECT Board Marker Probe BMP-2” is toegevoegd aan je winkelwagen. Bekijk winkelwagen
-
Adjustable Receptacle Insertion Tool ARIT-25 (Imp.)
- € 334,87 Excl.
- Toevoegen aan winkelwagen
- Used for Receptacle Installaton for ECT SPR-2/-25/-64, Mounting Height: Flush to .220" (5.59mm) The ARIT-25M has a Metric height-adjustment scale and the ARIT-25 has an imperial height-adjustment scale
-
Adjustable Receptacle Insertion Tool ARIT-25M (Metrisch)
- € 334,87 Excl.
- Toevoegen aan winkelwagen
- Used for Receptacle Installaton for ECT SPR-2/-25/-64, Mounting Height: Flush to .220" (5.59mm) The ARIT-25M has a Metric height-adjustment scale and the ARIT-25 has an imperial height-adjustment scale
-
ECT Bead Probe BTP-1F-8
- € 4,26 Excl.
- Toevoegen aan winkelwagen
- ATTENTION: Minimum order Quantity will be 100 pieces !! Bead probe technology (BPT) is technique used to provide electrical access (called “nodal access”) to printed circuit board (PCB) circuitry for performing in-circuit testing (ICT). It makes use of small beads of solder placed onto the board's traces to allow measuring and controlling of the signals using a test probe. This permits test access to boards on which standard…
-
ECT Bead Probe BTP-25C-4
- € 3,76 Excl.
- Toevoegen aan winkelwagen
- ATTENTION: Minimum order Quantity will be 100 pieces !! Bead probe technology (BPT) is technique used to provide electrical access (called “nodal access”) to printed circuit board (PCB) circuitry for performing in-circuit testing (ICT). It makes use of small beads of solder placed onto the board's traces to allow measuring and controlling of the signals using a test probe. This permits test access to boards on which standard…
-
ECT Bead Probe BTP-25C-8
- € 3,56 Excl.
- Toevoegen aan winkelwagen
- ATTENTION: Minimum order Quantity will be 100 pieces !! Bead probe technology (BPT) is technique used to provide electrical access (called “nodal access”) to printed circuit board (PCB) circuitry for performing in-circuit testing (ICT). It makes use of small beads of solder placed onto the board's traces to allow measuring and controlling of the signals using a test probe. This permits test access to boards on which standard…
-
ECT Board Marker Probe BMP-4
- € 392,04 Excl.
- Toevoegen aan winkelwagen
- Electrical Current Rating (Amps): .020 Voltage Rating (VDC): 12 Recommended Duty Cycle: 2 sec. On (min.), 3 sec. Off Materials & Finishes Plunger Material: Carbide Remark to Materials: Receptacle: Stainless Steel Mechanical Test Center (mil): 1,000 Test Center (mm): 25.40 Full Travel (mil): 79 Full Travel (mm): 2.01 Recommended Travel (mil): 50 Recommended Travel (mm): 1.27 Full Marker Travel (mil):…
-
ECT Board Marker Replacement Tip Kit – BMT-4
- € 49,01 Excl.
- Toevoegen aan winkelwagen
- Applications: The BMP Board Marker Probe patented design is for installation on bare board or loaded board test fixtures. When your tester is equipped with the appropriate electronics and software, the BMP scribes a permanent .050” circle on every “passed” PCB or device tested. Boards that fail the test are not marked. The risk of human error is eliminated in…
