Mux-Mate HP 32CH Signal Multiplexer

Beschrijving

The MUX-MATE/HP32(vII) is a high performance 32channel signal multiplexer that is used to route test points from the DUT (device-under-test), to external measurement equipment (i.e., oscilloscopes, digital volt meters and frequency counters).
Designed for embedded applications, the MUX-MATE/HP32(vII) can be installed directly into custom Instrument Enclosures, Mechanical Test Fixtures, or support larger ATE “rack-n-stack” systems. Many test solutions can be quickly built by connecting the MUX-MATE/HP32(vII) to a PC laptop or desktop, and then running our GUI software. No external power source is required, since power is supplied through the USB interface. Easy access to the hardware is made available through a convenient set of screw terminal connectors or box header.
There are two options for controlling the MUX-MATE/ HP32(vII) (with a Host PC or embedded microcontroller). In the case of the PC, the MUX-ATE/HP32(vII) is connected by an optional USB interface and responds to a simple set of ASCII commands.
Programming is easy using Visual BASIC, C/C++, LabView, LabWindows or any language that allows access to through a serial port. For embedded operation, control the MUX-MATE/HP32 (vII) with the Pico-MATE (our Embedded Test Controller), or any microcontroller (i.e., ARM, AVR, PIC or STAMP). Try combining the MUX-MATE/HP32(vII) with other OI test instruments (such as the DUT-MATE ‘power sequence module’, the Check-MATE ‘data acquisition module’ and others). Use our ETS Series products to build unlimited test solutions quickly, confidently and affordably.

Part                           # Name
ETS-4220-00       MUX-MATE/HP(vIII), 32-CH Signal Multiplexer Module
ETS-4221-00        MUX-MATE/HP(vIII), 32-CH Signal Multiplexer with USB-MATE, USB Interface Module

Bekijk de lijst met alle beschikbare modules, click here for the list with all available modules!